In Your Plant11 plant integration capabilities.Here’s how it fits your line.
Line handling, quality analysis, data export, and support. Each capability is built into the inspection software.
Line handling
Capture Path OptimizationThe camera stops only where the board requires it. Fewer captures per board with every check enabled.
Top/Bottom Side Program SelectionProgram each side of a double-sided assembly separately, then run both in one inspection. The AI recognises which side is in front of the camera and applies the matching program.
Pass/Fail Board RoutingFailed boards are sorted according to the configured strategy, without operator intervention.
Quality analysis
Gage R&R (GR&R)Repeatability and reproducibility study run in the software, on your boards, with the result exported directly.
Process Capability (Cpk)Process capability calculated from the inspection measurements the machine is already taking.
First Pass YieldWhole-board and sub-panel FPY. Per-position yield in a panel shows where a stencil or reflow problem sits.
Data & traceability
MES ExportCSV results, defect crop images, and the whole-board image per unit. Defect codes mapped to your MES vendor codes.
Inspection History & ReportsEvery inspection is stored with its images and verdict, so any board can be traced back. Reports and all analysis views export to Excel.
Operations & support
Repair StationA dedicated screen for the repair operator: the defect call, its location on the board, and the image behind it.
Offline ProgrammingProgram a product on a machine away from the line, export it, and import it on the production machine.
Remote SupportRemote assistance from our engineers when a problem needs a second look.
Bring your quality and MES requirements.
Spend 30 minutes with one of our engineers. We’ll confirm the gauge study, the MES format, and the line handling before the machine ships.